Whats in the box
Standard presser foot Overlock/Coverstitch #C11
For general sewing projects with overlock and combostitches. The markings on the presser foot are practical guiding aids.
Cover-/chainstitch foot #C13
The Cover-/chainstitch foot improves fabric feeding for flat even seams and hems in knit and woven material. Its makes precise stitching easy, for example when sewing circles or tubes.
Slide-On Table L 850 / 890
The Extension table increases the sewing area to the left of the needle. It allows large fabrics to be guided more easily and gives a better overview of the sewing project.
Knee lifter/Free Hand System (FHS)
BERNINA‘s unique Free-Hand System (FHS) lets you raise the presser foot via a knee lifter. This leaves both hands free to guide your project.
Cut-Offs Bin
The cut-offs bin keeps the sewing table tidy. Simply click it on to the looper cover and dispose of fabric cut-offs immediately after cutting. It can also be used to store the foot control when the machine is not in use.
Freearm Cover
The freearm cover is used to cover the opening of the freearm to get a consistent working surface in the sewing area. At the same time, the stitch plate remains easily accessible.
Right Seam Guide L 850/890
The right seam guide helps to guide the fabric and ensures that it is cut evenly.
Needle threader/inserter L 850/890
The needle threader / inserter makes it easy to hold, insert and thread overlocker needles.
BERNINA tweezers
BERNINA tweezers allow you to thread your overlocker with ease and remove any remaining pieces of thread from the machine.
Threading Wire
If the air threader is out of work or a looper pipe blocked, the wire can be used temporarily to thread in order to complete the started sewing project.
Brush L 850/890
This tool helps to remove dust and lint from the looper and stitch-plate area.
Oiler
Regular care ensures the flawless operation of the overlocker. Lubricating with this convenient oiler is an important part of it. For overlockers a special oil is used, declared on its label.
Screwdriver
This screwdriver measures 1.5 mm in diameter and has a hex head.
Torx T10 screwdriver
To loosen/tighten the stitch plate screws.
CS Lock Tool
With the CS Lock Tool, the needle threads can be pulled between foot and stitch plate easily. This eses cutting and locking the cover- and chainstitch. The scale serves as tool to measure hems, seams or mark fabrics. In addition it can be used to adjust the seam guide. Also overlock stitches can be locked.
Accessories Box
The large Accessory box and the corresponding extension box provide a lot of storage space for presser feet and further accessories. The knobs on the bottom of the boxes ensure a solid stability on the machine and prevent the boxes from shifting during transportation. The removable lid serves as a temporary tray for additional small parts used while sewing. The exentsion box is standard with L 890 and optional for L 850.
Spool Stabilizer L 850/890
The spool stabilizer prevents spools and cones of various sizes from vibrating at any sewing speed.